Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Displaying Material Properties in ODB

Status
Not open for further replies.
pgrossm000

pgrossm000

Mechanical
Joined
Feb 16, 2017
Messages
11
Location
US
I am varying hyperelastic constants along a piece of tissue by making them temperature-dependent and applying a temperature predefined field. I want to make sure that the hyperelastic constants are varying like I want them to using this method. What can I use to output the hyperelastic constants in the odb?
 
Status
Not open for further replies.

Similar threads

C
  • Question Question
Basalt Fibre Reinforced Concrete material properties in Abaqus
Replies
6
Views
3K
chrisb121973
C
S
  • Question Question
TO FIND CONCRETE DAMAGE PLASTICITY MATERIAL PROPERTIES FOR STEEL FIBRE REINFORCED CONCRETE BY USING EXPERIMENTAL STRESS STRAIN RESULTS
Replies
0
Views
3K
Shreyas M
S
M
  • Question Question
Material units
Replies
3
Views
12K
DanStro
DanStro
M
  • Locked
Python script to obtain the Material name of each material in the Abaqus model
Replies
4
Views
5K
FEA way
FEA way
K
  • Locked
  • Question Question
How to Directly Output Strain Values for Specific Node/Element Sets Without Writing an ODB File in Abaqus?
Replies
3
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top