Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Display Solid-Model Loads

Status
Not open for further replies.
UConnSD

UConnSD

Aerospace
Joined
Mar 18, 2007
Messages
2
Location
US
Is there a way to display the applied solid-model loads in ANSYS 10? I realize this may be a dumb question, as the documentaion says that it can't be done. Thanks in advance.
 
Sort by date Sort by votes
Take a look at the /PBF command in the help of Ansys. Or with the GUI: Plot Ctrls > Symbols.

Regards,
Alex
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

vickyiamlucky
  • Locked
  • Question Question
Ansys Symmetry model to full model cut boundary dispacemnt or force bc
Replies
0
Views
727
vickyiamlucky
vickyiamlucky
andradesilva
  • Locked
  • Question Question
thin-walled 3D solid to a shell
Replies
1
Views
479
Stick.
Stick.
Jeremy1989
  • Locked
  • Question Question
Difference in Von Mises Results Between Beam Model and 3D Model
Replies
2
Views
549
Stick.
Stick.
PedroCarneiro22
  • Locked
  • Question Question
Mpc184 solid elements
Replies
0
Views
326
PedroCarneiro22
PedroCarneiro22
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears

Part and Inventory Search

Sponsor

Back
Top