Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

display colours

Status
Not open for further replies.

player1

Mechanical
Joined
Aug 10, 2002
Messages
7
Location
GB
When I open solid works, the screen background is black and I cannot change it. Is the problem related to the video card or screen driver or what. Just remeber, you are what you are
 
What video are you using?

I would say thats probably your problem, but with out knowing what card its hard to say.

Regards, Scott Baugh, CSWP [spin] [americanflag]
3DVision Technologies
credence69@REMOVEhotmail.com

*When in doubt always check the help*
 
Scott is assuming that you've tried DOCUMENT PROPERTIES -> COLOR -> VIEWPOINT BACKGROUND -> EDIT...

Also check your video card at:
www.solidworks.com/swdocs/support/html/videoissues/videotest.cfm
And the usual: make sure you're using all the latest drivers blah blah blah...
[santa3] Ho3
tatej@usfilter.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top