Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Disappearing Threads

Status
Not open for further replies.
Heckdogg

Heckdogg

Mechanical
Joined
Jan 24, 2005
Messages
112
Location
US
I have a few parts that the threads do not appear (in the side views of the holes), but the hole itself is there. The tapped holes were created using the hole wizard, and the drawing views are slightly rotated. When the drawing views are vertical/horizontal, the threads appear. Anyone else experience this? I am running SW2005 SP0.1.

Thanks
 
Sort by date Sort by votes
That is to be expected as the cosmetic thread is a 2D representation of a thread. If the views are "slightly rotated" the cosmetic thread would have to be in 3D in order to be seen.

[cheers] & all the best.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

D
Screw threads not lining up
Replies
0
Views
2K
DKScidmore
D
CheckerHater
  • Locked
  • Question Question
Incomplete Threads
Replies
11
Views
1K
SBaugh
SBaugh
Nella95
  • Locked
  • Question Question
Disappearing Detail View...
Replies
4
Views
844
samuelm
samuelm
MechEngSS
  • Locked
  • Helpful tip Helpful tip
Disappearing Bend Lines
Replies
2
Views
671
SBaugh
SBaugh
TipTop314
  • Locked
  • Question Question
Disappearing apostrophes from drawing notes
Replies
9
Views
422
TipTop314
TipTop314

Part and Inventory Search

Sponsor

Back
Top