Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Disappearing Projection

Status
Not open for further replies.
treddie

treddie

Computer
Joined
Dec 17, 2005
Messages
417
Location
US
Hi.

I have a problem I have never encountered before. I have a sketch that I am projecting onto some freeform surfaces. It shows up as a yellow projection, indicating all is well. But when I click OK, it does not render. I know it's there, because I can click on its feature, and it appears in red as long as it is selected. It is not because the projection color is wrong, because I have other projected lines onto those same surfaces that show up just fine.

Strange.
 
Sort by date Sort by votes
Oh...There are no warning messages either, and the feature in the tree is not red (so no regen failure as far as Creo is concerned).
 
Upvote 0 Downvote
OK...I just deleted the projection and started again. This time it came out fine. I guess the original one was corrupted somehow.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

9
angle of projection
Replies
1
Views
4K
dr_gallup
D
D
WF4.0 DISAPPEARING DWG
Replies
4
Views
5K
dantheguitargod
D
P
projection of a sketch
Replies
1
Views
5K
Hanumanth217
H
S
Parts disappearing in assembly
Replies
2
Views
12K
Stark060
S
M
Disappearing parameter from drawing note
Replies
0
Views
2K
mdristy
M

Part and Inventory Search

Sponsor

Back
Top