Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
DimXpert
- Thread starter stume04
- Start date
my only advice is not to use the Dimxpert. As I hate these xpert features, they are just a waste of time. These features are for very basic applications. Oftenly do not work properly in bit complex parts.....
but others can have different views to me.
but others can have different views to me.
I have tried a few times to use it in the past. I like the idea of being able to have the computer calculate tolerance stack ups instead of generating a fairly large excel file.
I have not had much luck with any molded or casting type parts. It seems to have a hard time with draft angles, cone shapes and anything that in a non-machined shape. That being said I am by no means an expert, I will try to use it for an hour or so and give up. I would love for my reseller to ofter a 1/2 day course on it though.
I have not had much luck with any molded or casting type parts. It seems to have a hard time with draft angles, cone shapes and anything that in a non-machined shape. That being said I am by no means an expert, I will try to use it for an hour or so and give up. I would love for my reseller to ofter a 1/2 day course on it though.
- Status