Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dimensioning Centerline Intersections

Status
Not open for further replies.
nubbz143

nubbz143

Mechanical
Joined
Dec 12, 2007
Messages
8
Location
US
I'm new to Solidworks coming from Inventor. I am making a drawing of an assembly for production use and I have multiple centerlines that intersect. How can i dimension the intersection of these centerlines created in the drawing.
 
Sort by date Sort by votes
I can't get a point to constrain to the centerline in the drawing view. This is in a drawing, not a part.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

powerhound
  • Locked
  • Question Question
Dual dimensioning and dimension format
Replies
8
Views
2K
ctopher
ctopher
E
Solidworks drawing add centerline for sweep and lofts
Replies
0
Views
3K
es2058
E
aleksandar81
  • Locked
  • Question Question
Dimensioning section in drawing
Replies
4
Views
341
aleksandar81
aleksandar81
M
Dimensioning a Taper
Replies
0
Views
2K
Matthew D
M
farzadtb
  • Locked
  • Question Question
Create horizontal and vertical Dimensioning after / from Intelligent Dimensioning
Replies
8
Views
374
SBaugh
SBaugh

Part and Inventory Search

Sponsor

Back
Top