Dimensioned Features 1

[MachineSMMC]

I have a feature that is dimensioned to from the centerline of a plate and is on the upper half of the plate (above the centerline) Lets say I want to move the dimensioned feature to the lower half of the plate. Is there an easy way to do this without deleting the dimension and re-dimensioning?

Thanks
Chris

 

[Heckler]

Pick the leader of the dimension you want to move along with hold the cntrl key then place the cursor over the new edge and release.

Heckler
Sr. Mechanical Engineer
SWx 2007 SP 3.0 & Pro/E 2001
XP Pro SP2.0 P4 3.6 GHz, 1GB RAM
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)

(In reference to David Beckham) "He can't kick with his left foot, he can't tackle, he can't head the ball and he doesn't score many goals. Apart from that, he's all right." -- George Best

 

[TheTick]

You can make the feature dimension driven. Then drag the sketch entities to near the new position, then toggle the dimensin back to driving.