Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Determination of pv diagram of lobe and screw compressors

Status
Not open for further replies.
mechanicaljw

mechanicaljw

Structural
Joined
Jun 14, 2012
Messages
80
Location
DE
Hello All,

I am relatively new to screw and lobe compressors and I am looking for good literature on how i can determine the pv plot of such compressors analytically. Any suggestions would be much appreciated.

Thanks!

Jimmy
 
Status
Not open for further replies.

Similar threads

W
  • Question Question
Root cause of harmonic oscillation in telescopic column
Replies
8
Views
3K
WestyTea
W
LS_SMS
  • Locked
  • Question Question
What is Significance of 33Hz in Seismic?
Replies
6
Views
3K
IRstuff
IRstuff
kingnero
  • Locked
  • Question Question
Welding on top of rail, to avoid noise in curves
Replies
4
Views
5K
kingnero
kingnero
cirus76
  • Locked
  • Question Question
modal analysis of centrifugal compressor skid
Replies
7
Views
1K
GregLocock
GregLocock
GregLocock
  • Locked
  • Question Question
A couple of modal analysis puzzles
Replies
11
Views
1K
GregLocock
GregLocock

Part and Inventory Search

Sponsor

Back
Top