Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Designing and Economic analysis of wet cooling tower.

Status
Not open for further replies.

martino6000

Chemical
Joined
Apr 29, 2005
Messages
8
Location
DE
Hi everybody!i want to know if anybody know a website or a book that describe how to construct Wet cooling tower.(What to take into consideration:material to use,Economic analysis and so on).
 
I know what a cooling tower is; have installed and operated many of them - both forced and induced draft.

What is a "wet" cooling tower?
 


To Art Montemayor. I believe it is a matter of an arbitrary classification used for steam-turbine power generation plants: the cooling towers you mentioned are considered the "wet" type; fin-fan air coolers are the "dry" type.
 
Hallo Montemeyor,
Wet cooling tower is a Cooling tower for the closed-circuit cooling of water where the water to be cooled comes into direct contact with the cooling air dissipating heat by evaporation and air heating. The air draught required for cooling can be induced by fans or by the natural effect of the stack of the cooling tower building (natural draught cooling tower)

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top