Design Table and Drawing Views 1

[cstilesii]

I have a part that I created a design table for with a default size and three other modified sizes. I was wondering if there is a way to insert three default front views into a drawing, and then utilize the design table to create the other sizes that I need. The way that I did it was to double click the size I wanted in the Configuration tab of the part, and the did a "Save As" and just saved three different instances of the part, then inserted them into the drawing one by one. I really hope this doesn't confuse anybody, and any help would be very appreciated.

Thank You
Charles

 

[CorBlimeyLimey]

1) Place multiple copies of the same view by simply repeating the process used to place the first view.
or
2) After placing one front view, highlight it & do a CTRL+C (or Edit > Copy), then click on an open space in the drawing & do a CTRL+V (or Edit > Paste). Repeat as required.

To change the config, RMB on a view & select Properties, then from the Use named configuration dropdown, select the config you want & click OK.


Making the best use of this Forum. faq559-716
How to get answers to your SW questions. faq559-1091
Helpful SW websites every user should be aware of. faq559-520

 

[cstilesii]

Thank you....That really helps!!!

Charles