'DESIGN STUDY TERMINATED ABNORMALLY' ... PRO/M STRUCURE 2001

[wkyeo]

Every time i run a design study with just one design parameter such as thickness, i get this message ... 'design study terminated abnormally' ...

but i ran the static analysis first without problem then follow by the design study which uses the information from the static analyse.

I am using pro/mechanica 2001.



I set the p-elements smaller, plotting grid = 8, polynomial = 9

 

[JHardy]

Open and browse the Log file - chances are, it will provide some additional information as to why your design study failed (eg out of memory, or an inconsistent set of input data, etc.)



If neccesary, re-post, with an extract from the bottom of the log file - we may be able to help you then.



Hope this helps.