Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design for Generator foundation pad

Status
Not open for further replies.

ali07

Structural
Dec 6, 2007
171
I am looking for design of generator foundation pad. In calculation of generator pad, what factors to consider. Generator is only 6600 lbs. Area required for footing is not much, but if someone can help regarding some calcs, it's appreciated.
 
Replies continue below

Recommended for you

No one here is going to design the pad for you within the realm of this forum, and, frankly, cannot with the limited information you have provided.

I strongly suggest that you engage the services of a local structural engineer to help with your structural needs.

Mike McCann
MMC Engineering
 
For your information i am a designer for
the generator pad. What information else is
required, do you need generator kVa's or electrical
information. I think you can suggest me about vibration
loads or something structurally to consider while design ing concrete slab on grade pad supporting generator loading.

 
ali07,

This question has been answered previously, use the google search at the top of the page and also check out sliderules website.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor