Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

design firms using Solid Edge

Status
Not open for further replies.

HDS

Mechanical
Joined
Jul 25, 2002
Messages
661
Location
US
Are there any product design firms out there that use Solid Edge?

I have seen several independent contractors but not any companies that can provide complete packages from Industrial Design to complete products. The ones I know of like Frog or Slingshot all use other cad packages that have a larger potential customer base.

(I am looking in the US but anyone from anywhere is welcome to add their name to the list.)

 
I'm not sure they cover all of what you want but Dock 5 is a contract shop using Solid Edge.

I'd be interested in seeing any other answers as we have had talk of outsourcing some design and if we are forced to do this it would be nice to at least have it in our primary CAD system.

KENAT,

Have you reminded yourself of faq731-376 recently, or taken a look at posting policies:
 
Depending what you have in mind and where, Portsmouth Aviation may even be worth a look. Though primarily defense/aerospace they dabble in commercial stuff too.

KENAT,

Have you reminded yourself of faq731-376 recently, or taken a look at posting policies:
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top