Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design Ansys

Status
Not open for further replies.
Amine A

Amine A

Mechanical
Joined
May 9, 2020
Messages
80
Location
FR
Hi everyone,
I imported a geometry which is composed by surfaces objects with x thickness (picture on the left ). I want to add a volume in the bottom of the structure like in the picture on the right. Do you have any ideas please. Thank you
 
 https://files.engineering.com/getfile.aspx?folder=c58e71ba-4f67-4059-9bc2-d5f0b5330aa9&file=engtip.JPG
Status
Not open for further replies.

Similar threads

SMKRe
  • Locked
  • Question Question
Profile factor in journal bearing design
Replies
1
Views
7K
BEMPE16524
BEMPE16524
Hesam267
  • Locked
  • Question Question
Tilting pad journal bearing design
Replies
6
Views
7K
elsabeth
elsabeth
Tuman_1232
  • Locked
  • Question Question
Small DC motor design
Replies
0
Views
5K
Tuman_1232
Tuman_1232
dawz
  • Locked
  • Question Question
Plain bearing use and greasing design
Replies
9
Views
3K
dawz
dawz
Walther1522
  • Locked
  • Question Question
Bearing Design Calculations and Help
Replies
4
Views
526
geesaman.d
geesaman.d

Part and Inventory Search

Sponsor

Back
Top