P
PLM Technology
Guest
Dear CATIA Fans,
Today's video is about keeping link between parts in CATIA 3DExperience R19x.
The video is divided in 3 Parts:
1) First, you will make the plastic cover part using 2 different bodies (cover and ribs). You will use the union trim feature to assemble the 2 bodies and obtain a nice result
2) One method to to remove the SSD from the Cover is to Copy/Paste Special "as result" the SSD body into the Cover 3DShape and remove it from the PartBody.
3) The second method to achieve this result is to use the feature Protected in Assembly Design. The result is very similar, but you also have the option for offsetting a surface around the part.
Please Like, Comments, Subscribe and Share
Find our models on GrabCad too: https://grabcad.com/plm.technology-1
