Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

desiging aerodynamic bike parts

Status
Not open for further replies.

eng1234

Mechanical
Nov 21, 2003
67
In our design development we are interested in tracking down various cross section shapes that fair well given a maximum yaw angle of 30 degrees. For the bike industry we are generally only concerned with air speed maximums of 40 mph.

Any advice on how programs to generate cross sections for CAD applications or places to look up current cross sections would be greatly appreciated. Generally the sizes of interest are up to 50mm major axis, up to 20mm minor axis.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor