Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Densitometer

Status
Not open for further replies.
weldtek

weldtek

Materials
Feb 12, 2005
897
Does anyone know of a service provider in the U.S., for the repair / calibration of a Konica PDA-81U?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Have you tried contacting them directly? There is not much out there on the web about the instrument, so I assume it may be an older type of product.


Regards,
 
Upvote 0 Downvote
Sorry I cannot be specific as I dont live or work in the US. However any good radiographic supplies company should be able to on-pass it to the appropriate service and calibration centre.

Old they may be but still thay are damned useful pieces of kit, small, handy and pin-poin reading capability

Nigel Armstrong
Karachaganak Petroleum
Kazakhstan
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top Bottom