Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

define Contact in abaqus/standard for large defirmation

Status
Not open for further replies.
BalthazarVictor

BalthazarVictor

Mechanical
Joined
Oct 19, 2011
Messages
7
Location
CH
Dear all,
I have two parts in abaqus / standard which are in contact but after applying the force, the other part penetrate the first one without any deformation and I have zero force everywhere(In case of using self contact).
If I use master slave, it will not converge.
Do you have any suggestion?

Thanks
Best regards
Victor
 
Status
Not open for further replies.

Similar threads

G.R
  • Locked
  • Question Question
Abaqus Standard errors
Replies
2
Views
3K
G.R
G.R
G
  • Locked
  • Question Question
Abaqus explicit - general contact problem
Replies
5
Views
18K
FEA way
FEA way
A
  • Solved
Applying Local Coordinate System for BC in Abaqus
Replies
1
Views
4K
FEA way
FEA way
E
  • Question Question
Embedded foundation in ABAQUS
Replies
3
Views
6K
FEA way
FEA way
A
  • Question Question
Recreating Ansys Sim in Abaqus
Replies
1
Views
10K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top