We are looking at methods to decommission an old pit style truck scale. The proposal from a scale company is to leave the pit in place, remove the concrete deck and fill the pit in with gravel. The bottom of the pit would have holes punched through to allow water to escape. Any thoughts on this proposal?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Decommissioning Old Pit Truck Scale
- Thread starter sarman11
- Start date
SlideRuleEra
Structural
Any oil, or similar contamination in the pit should be removed before filling the pit with gravel. Otherwise, it will pollute the soil / groundwater.
![[idea]](/data/assets/smilies/idea.gif "[idea] [idea]")
![[r2d2]](/data/assets/smilies/r2d2.gif "[r2d2] [r2d2]")
The proposal is what is customarily done. Concrete is usually removed done to 3-5 fr. below grade and backfilled. Of course, it should be clean materials as SlideRuleEra posted.
On the other hand, if future plans include building on top of the site, you may consider other alternatives.
On the other hand, if future plans include building on top of the site, you may consider other alternatives.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question