Data Highway and Duplex "Who Makes It"

[Wattman]

I'm sure everyone has seen the access terminals that are on the mounted on the outside of an enclosure (NEMA 12 or 4 with Flip top cover) which allow you to plug in a laptop to 120VAC and has an other plugs for connecting to a network without opening the enclosure.

I have looked everywhere and can only find distributors who sell them with their company logo on them. I would like to have some made up with my company logo on it of course.

I had a catalog of the original maker of these but cannot locate it or remember the name.

Does anyone know who actually makes these devices??


I found

http://www.grace-eng.com

but they don't offer the one I need
"two gang DH+ (9-pin and mini din) rec and 3 amp breaker"



Any help greatly appreciated
Please advise

 

[dogleg43]

Several companies make these.

Try Daykin

http://www.daykin.com/

or Phoenix

 

[Pistol11]

Grace Engineering @

http://www.grace-eng.com/ge/index.html

has the best mix of products. Phoenix Contact has a new line that offers similar interface options.

 

[TonyBabu]

Hi..
I plan to use flexpak3000 for flywheel application. We use 150 HP, 1800RPM DC motor. Flywheel diameter is 70". Flywheel will keep running with 1800 RPM with full load. In the top speed, flywheel will unload and coast to stop.
We want to replace old control using Flexpak 3000.
I need suggestion from anybody the same experience.
Thank you.
Tony