Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Damping of Seismic Isolation Bearings

Status
Not open for further replies.
KOKONIS36

KOKONIS36

Structural
Oct 28, 2001
28

What is a good number to use for damping of Seismic Isolation Bearings ?Is 15% to 20% a reasonable number ?
 
Status
Not open for further replies.

Similar threads

bugbus
  • Locked
  • Question
Seismic isolation using conventional laminated elastomeric bearings 1
Replies
5
Views
747
BridgeSmith
BridgeSmith
BridgeSmith
  • Locked
  • Question
Aligning lead-rubber seismic isolators
Replies
10
Views
5K
BridgeSmith
BridgeSmith
ATHS
  • Locked
  • Question
TU load on fixed/expansion bearings
Replies
2
Views
585
BridgeSmith
BridgeSmith
Hassaan_16
  • Locked
  • Question
Seismic analysis of a single span bridge according to AASHTO LRFD
Replies
14
Views
1K
tatox
tatox
S
  • Question
pls guide.. how to do restoration work of fallen footpath slab of bridge
Replies
5
Views
6K
FacEngrPE
FacEngrPE

Part and Inventory Search

Sponsor

Back
Top Bottom