Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Damping in Durafoam Part- FEM (automotive \ structural)

Status
Not open for further replies.
engg35mechie

engg35mechie

Automotive
Joined
Apr 28, 2015
Messages
14
Location
DE
Hallo

I have a automotive part made of DuraForm® HST Composite with rapid protoyping (SLS). I want to analyse this for natural frequency (NVH) with FEA software . Any idea suggestion how I include damping parameter (structural / material) in FEA Model.
So any ques to any literature about it.
 
Status
Not open for further replies.

Similar threads

martin555
  • Locked
  • Question Question
Overall Laminate Strain in Femap
Replies
3
Views
1K
SWComposites
SWComposites
DanielK12
  • Locked
  • Question Question
BIO Composite -> Stuck in mold
Replies
1
Views
842
Compositepro
Compositepro
Cisnerjo
  • Locked
  • Question Question
Composite Part Stuck to a Mold
Replies
10
Views
1K
SWComposites
SWComposites
crostolo
  • Locked
  • Question Question
Inserts in Thick CFRP Panels
Replies
2
Views
570
crostolo
crostolo
DB-TACG
  • Locked
  • Question Question
Use of wood core in an autoclave cured part?
Replies
2
Views
460
DB-TACG
DB-TACG

Part and Inventory Search

Sponsor

Back
Top