Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Damage modeling in Abaqus

Status
Not open for further replies.
shaldar

shaldar

Mechanical
Joined
Oct 1, 2012
Messages
14
Location
US
Can I use Ductile damage criteria with standard isotropic plasticity (1st option in the Abaqus plastic material behavior defined by yield stress and plastic strain)?
Any help is highly appreciated!

Regards,
 
Status
Not open for further replies.

Similar threads

DavidMcArthur
  • Locked
  • Question Question
ABAQUS Explicit Damage
Replies
2
Views
957
DavidMcArthur
DavidMcArthur
S
  • Question Question
viscoelastic behavior + Damage
Replies
8
Views
12K
snow83
S
I
  • Question Question
Wear in abaqus
Replies
8
Views
15K
Rama27
R
R
  • Question Question
Cohesive Zone Modeling of FRP Pull-Out Test in Grooved Concrete – Best Approach for Adhesive Layer in Abaqus?"
Replies
4
Views
4K
FEA way
FEA way
vikram manoj
  • Question Question
How to reduce fiber damage
Replies
2
Views
8K
Compositepro
Compositepro

Part and Inventory Search

Sponsor

Back
Top