Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Damage Evalution Problem

Status
Not open for further replies.
aslfd

aslfd

Materials
Joined
Feb 5, 2015
Messages
20
Location
FR
Hello,

I study a damage problem (Dynamic-Temp_disp Exp) between a tack (nail) and two sheets. At th end of the simulation there is no damage on the sheets
Tack is analytical rigid
Sheets are deformable
I use a JK platicity and a JK damage
Capture_nuffls.jpg

1_jn2i0o.png

2_xmgip3.png


Thanks
 
Status
Not open for further replies.

Similar threads

S
  • Question Question
viscoelastic behavior + Damage
Replies
8
Views
12K
snow83
S
vikram manoj
  • Question Question
How to reduce fiber damage
Replies
2
Views
8K
Compositepro
Compositepro
jball1
  • Locked
  • Question Question
Connector Damage/Failure
Replies
6
Views
1K
jball1
jball1
DavidMcArthur
  • Locked
  • Question Question
ABAQUS Explicit Damage
Replies
2
Views
1K
DavidMcArthur
DavidMcArthur
S
  • Question Question
EQUATIONS TO FIND YOUNGS MODULUS,CONCRETE DAMAGE PLASTICITY PARAMETERS FOR STEEL FIBRE REINFORCED CONCRETE
Replies
4
Views
8K
Shreyas M
S

Part and Inventory Search

Sponsor

Back
Top