Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cyclic Plasticity

Status
Not open for further replies.
Ram28

Ram28

Materials
Joined
Feb 20, 2006
Messages
1
Location
DE
Hi ABAQUS users,

I have been trying to run an cyclic plasticity model using the ABAQUS v6.4. However, I am not completely convinced with the description given in the manual on the procedures to obtain the hardening parameters. I am trying to figure the right way to use the mixed hardening. If there is anyone experienced in this area please give me your helping hand.

Ram
 
Status
Not open for further replies.

Similar threads

S
  • Question Question
EQUATIONS TO FIND YOUNGS MODULUS,CONCRETE DAMAGE PLASTICITY PARAMETERS FOR STEEL FIBRE REINFORCED CONCRETE
Replies
4
Views
8K
Shreyas M
S
S
  • Question Question
TO FIND CONCRETE DAMAGE PLASTICITY MATERIAL PROPERTIES FOR STEEL FIBRE REINFORCED CONCRETE BY USING EXPERIMENTAL STRESS STRAIN RESULTS
Replies
0
Views
3K
Shreyas M
S
Wonder_Women
  • Locked
  • Question Question
Modeling Kinematic hardening model for steel in Cyclic analysis
Replies
3
Views
631
FEA way
FEA way
abc123ali
  • Locked
  • Question Question
No Shear plasticity data input option in abaqus
Replies
3
Views
508
FEA way
FEA way
kushwah_dk
  • Locked
  • Question Question
Stiffness matrix in plasticity region
Replies
1
Views
253
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top