cornemo
Mechanical
- Apr 23, 2009
- 55
I have to design a cup tank (a tank within a tank, the inner is the storage container, the outer is to capture the medium in case of leakage of the inner tank). In design codes for cylindrical storage tanks like API650 and EN 14015 a double-bottom is adressed briefly. However a cup tank is nowhere mentioned.
Before I start making up all kinds of design rules myself I want to check if there are design codes for such kind of tanks. Remember that the outer tank is just a leakage container and the inner is the actual non-pressurized (-5/+10 mbar) storage tank. If any of you can help me it would be highly appreciated. Also design considerations are welcome.
With regards, Corné
Before I start making up all kinds of design rules myself I want to check if there are design codes for such kind of tanks. Remember that the outer tank is just a leakage container and the inner is the actual non-pressurized (-5/+10 mbar) storage tank. If any of you can help me it would be highly appreciated. Also design considerations are welcome.
With regards, Corné