Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creep

Status
Not open for further replies.
syed86kar

syed86kar

Aerospace
Joined
Feb 23, 2015
Messages
1
Location
DE
thread727-75458
brkica (Mechanical)
Hi,
I want to perform creep analysis using MSC Nastran Patran, I need help.
I have entered creep coefficients in creep model, MSC Nastran SOL 600, but yet not successful, any tutorial,bdf is required to see the steps...
if this analysis required any bulk data entry code then kindly share it..

or any technique..

Regards
M.Ali.Shah
 
Status
Not open for further replies.

Similar threads

netsonicyxf
  • Locked
  • Question Question
Creep and Shrink Analysis is Successful for Solid Section but Unsuccessful for Hollow Section
Replies
0
Views
213
netsonicyxf
netsonicyxf
teb1
  • Locked
  • Question Question
Constant Temperature creep.
Replies
1
Views
223
FEA way
FEA way
lancelot82
  • Locked
  • Question Question
ELCD: Total energy dissipated in the element by creep, swelling, and viscoelasticity
Replies
0
Views
123
lancelot82
lancelot82
danielbrandon85
  • Locked
  • Question Question
Mode 2 crack propagation due to creep with Ansys 13
Replies
0
Views
87
danielbrandon85
danielbrandon85
omoya
  • Locked
  • Question Question
Best creep model for ABS
Replies
0
Views
130
omoya
omoya

Part and Inventory Search

Sponsor

Back
Top