Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creating multiple sheets based on configurations

  • Thread starter Thread starter JordanR
  • Start date Start date
J

JordanR

Guest
Heya Folks

I've run into a bit of an issue generating large quantities of sheets for 1 drawing.

Inside one Component I have large amounts of configurations lets say for instance

Configuration Name:
A1
A2
A3
A4
A..
A100
B1
B2
B3
B4
B...
B100
C1
C2
C3
C4
C...
C100

Is there a way to have Solidworks grab All of Group A drop it into 1 Sheet in Top View Then generate a new sheet with all of Group B in top view and so on and so on.

At the moment we are stuck doing it manually, dropping multiples of the drawing into one sheet and selecting all the various configurations and changing them.

Any help would be greatly appreciated
 

Part and Inventory Search

Sponsor

Back
Top