Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creating MPC in Hypermesh for Abaqus profile

Status
Not open for further replies.
gregf84

gregf84

Mechanical
Joined
Feb 20, 2013
Messages
34
Location
US
Hello,
Does anyone know how to create an MPC in Hypermesh when you are using the Abaqus profile? That is to say I am building an Abaqus model in Hypermesh but can not find how to create an MPC. I looked at the option to create an Equation but it only creates an Equation element and not a MPC. I need to create an MPC which has beam elements between the independent and the dependent nodes. Thanks for any help.

Greg...........
 
Status
Not open for further replies.

Similar threads

Nir_k
  • Locked
  • Question Question
How to select both the exterior and interior surfaces (All Entities) of an element when creating surfaces in Hypermesh?
Replies
0
Views
2K
Nir_k
Nir_k
Max121
  • Locked
  • Question Question
"Exporting mesh hypermesh to ansys
Replies
0
Views
723
Max121
Max121
Radius1
  • Locked
  • Question Question
Mouse Wheel Zoom Direction for Hypermesh
Replies
0
Views
569
Radius1
Radius1
flyforever85
  • Locked
  • Question Question
How can I keep the same Components in Hypermesh and Hyperview
Replies
0
Views
658
flyforever85
flyforever85
enigma111
  • Locked
  • Question Question
hypermesh tcl script define elements type
Replies
0
Views
1K
enigma111
enigma111

Part and Inventory Search

Sponsor

Back
Top