Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creating a title block

Status
Not open for further replies.
lesleyc

lesleyc

Mechanical
Joined
Sep 15, 2003
Messages
12
Location
US
I want to create a title block and save it as a template for future drawings, can anyone give me some assitance to get started?
Thanks!
 
Sort by date Sort by votes
I believe it is covered in the documentation.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

CAD2015
  • Locked
  • Question Question
NX - Creating a drawing from a part......
Replies
6
Views
1K
CAD2015
CAD2015
I
  • Locked
  • Question Question
Block UI Styler apply changes
Replies
0
Views
1K
issamo
I
M
  • Locked
  • Question Question
Using if expressions for creating law curves
Replies
7
Views
4K
MbToxic
M
Atharva_Mechanical
  • Locked
  • Question Question
Creating wire fencing using NX
Replies
7
Views
877
Atharva_Mechanical
Atharva_Mechanical
rafi22
  • Locked
  • Question Question
creating hotkeys /shortcut key for userdefined custom view
Replies
0
Views
1K
rafi22
rafi22

Part and Inventory Search

Sponsor

Back
Top