Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creating a sketch from a section?

  • Thread starter Thread starter Cristian Tatar
  • Start date Start date
C

Cristian Tatar

Guest
Hello guys!
I would like to ask for your help on an issue i'm having. I have created a solid wing of an aircraft using a few different aerofoil profiles along the way. Is there any way i can create a sketch using a section on the wing so that i can start working on the internal structure of the wing?

Thanks
 
There is an intersect tool in Sketch workbench. Just create (or edit) the sketch, and use the Intersect 3D Elements icon to intersect the sketch plane with the face of the wing.
 
Last edited:
Yes, or if you have - use the section tool which is in the DMU Space Analysis workbench. It can export the section into a new part creating a ready-to-work-on sketch.
 

Part and Inventory Search

Sponsor

Back
Top