Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creating 2D weld elements in Autodesk Simulation Mechanical (Algor)

Status
Not open for further replies.
barrti

barrti

Mechanical
Joined
Apr 19, 2012
Messages
16
Location
AU
Greetings,

1. Does any one know how I can draw in a long series of plate elements which represent the weld, on a midplane meshed structure (or brick element structure) which I have imported from Inventor?

2. Has anyone had much experience simulating welds using ASM?


3. Can anyone comment on using the welded contact within ASM?

thanks
 
Status
Not open for further replies.

Similar threads

s.saletic
  • Locked
  • Question Question
Algor from MS-DOS era
Replies
0
Views
2K
s.saletic
s.saletic
PJ18
  • Locked
  • Question Question
Autodesk Simulation Mechanical Accuracy
Replies
0
Views
810
PJ18
PJ18
healingfire
  • Locked
  • Question Question
Autodesk Simulation Mechanical/Multiphysics
Replies
1
Views
806
jelmerra
jelmerra
Boghi1990
  • Locked
  • Question Question
Circumferential, Radial & Axial Stresses , Output Results Algor Autodesk Mechanical Simulation
Replies
1
Views
830
barrti
barrti
flyboy555
  • Locked
  • Question Question
ALGOR FEA error: More activated element parts in AGSDB than FEM
Replies
0
Views
730
flyboy555
flyboy555

Part and Inventory Search

Sponsor

Back
Top