Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Create and call subprogram

Status
Not open for further replies.
wedxza

wedxza

Mechanical
Joined
Jun 25, 2015
Messages
20
Location
US
Hi,

Just wonder if there is a way that I can create a subprogram, and the method to call it.

I tried to search online. I found something related to Fanuc subprogram, but I am still confused, and don't know how.

Can anyone help?

Thanks
 
Status
Not open for further replies.

Similar threads

CAD2015
  • Locked
  • Question Question
Create Sheet and Drawing templates........................
Replies
7
Views
4K
CAD2015
CAD2015
Jashe
  • Question Question
How to create Radial Section Cut on NX Drawing
Replies
5
Views
11K
SDETERS
SDETERS
MANox
  • Locked
  • Question Question
Number of holes in Hole and thread callout
Replies
0
Views
1K
MANox
MANox
Befuddled
  • Locked
  • Question Question
Create a lots of ITEMS in TC in bulk
Replies
3
Views
2K
Befuddled
Befuddled
moog3
  • Locked
  • Question Question
Grip create new .prt from template?
Replies
6
Views
718
moog3
moog3

Part and Inventory Search

Sponsor

Back
Top