Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cp,Cf,Cd design factors in EJMA 10th edition

Status
Not open for further replies.
Shayak Chatterjee

Shayak Chatterjee

Student
Joined
Jun 2, 2022
Messages
2
Location
US
Hello! Was wondering what the Cp,Cf,Cd factors mean in the EJMA 10th edition. I didn't quite understand the whole "factor used in specific design calculations to relate U-shaped bellows convolution segment behaviour to a simple strip beam" bit very sorry for the basic question. I would highly appreciate an explanation as to what this means and how the 3 are different except in name [bigsmile]
 
Status
Not open for further replies.

Similar threads

stanleyshum1997
  • Question Question
Slab and Beam design
Replies
1
Views
9K
BulbTheBuilder
BulbTheBuilder
D
  • Locked
  • Question Question
Headstock positioner table tilt torque in a propped cantilever design
Replies
4
Views
4K
dopetraveller
D
I
  • Question Question
Roller Coaster Design Challenge
Replies
17
Views
2K
waross
waross
samuel Chinonso
  • Locked
  • Question Question
Padeye design calculations
Replies
0
Views
761
samuel Chinonso
samuel Chinonso
Kakashi-01
  • Locked
  • Question Question
Heat exchanger network design
Replies
0
Views
2K
Kakashi-01
Kakashi-01

Part and Inventory Search

Sponsor

Back
Top