Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Corrosion inhibitors injection rate
- Thread starter Buchi
- Start date
Certainly.
1) ask your corrosion inhibitor vendor what the recommended concentration in your application is
2) multiply the concentration with the given hydrocarbons flowrate
3) inject the inhibitor at the flowrate you just calculated
Does this help?
1) ask your corrosion inhibitor vendor what the recommended concentration in your application is
2) multiply the concentration with the given hydrocarbons flowrate
3) inject the inhibitor at the flowrate you just calculated
Does this help?
- Status
Similar threads
- Locked
- Question
- Locked
- Question
