Copy Paste Sketch in NX8.5

[PSI-CAD]

I found a strange behaviour or maybe a bug in NX8.5 when using copy paste a sketch with named expression.

Try to copy paste the sketch MOUTH in NX7.5 without any link with the original sketch (create new expression) ==> all expressions are new

Now

Try to do the same with NX8.5
==> the angular dimension p327 becomes p331 in the sketch MOUTH_0 that it's right
== > But R and R_mouth remain linked that it's wrong

So the function doesn't work with named expression.

Thanks in advance to confirm, then I will open a call to GTAC


Regards
Didier Psaltopoulos

http://www.psi-cad.com

 

[JohnRBaker]

Are you copy & pasting into the same part file or a different one?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[PSI-CAD]

Hi John

Thanks to have a look

In the same part


Regards
Didier Psaltopoulos

http://www.psi-cad.com

 

[JohnRBaker]

You're correct, it appears that it is NOT creating new expressions for the named ones, which is not how it behaved in NX 7.5. I checked this with NX 8.5.3.3 and NX 9.0.0.19 and they are both not creating new expressions for the named expressions, only the p-numbered expressions are getting new expressions. I would go ahead and contact GTAC and have them open a PR. If you wish you can mention that I verified that this is still an issue with both the latest MR of NX 8.5 and as well as the production release of NX 9.0.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[PSI-CAD]

Hi John

Thanks a lot for your confirmation I thought to become crazy.

I will open a call

Regards


Regards
Didier Psaltopoulos

http://www.psi-cad.com

 

[NutAce]

Hi Didier.

Can you share the PR in here..I would like to keep track on it as well...

Many thanks in advance..

Ronald van den Broek
Mechanical Engineer
Cad Environment Coordinator
Wärtsilä, Propulsion Services
NX8.5.2 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5