Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Coppercoat in HF Alklations units

Status
Not open for further replies.
stopsunset

stopsunset

Mechanical
Joined
Jul 26, 2004
Messages
22
Location
US
I've seen that a copper based thread lubricant is not recommended for use in HF alkylation units, rather a Nickel base anti seize compound is recommended. Why is that? I've heard that for marine applications to prevent a galvanic cell from forming but not HF units.Thanks
 
Status
Not open for further replies.

Similar threads

J
  • Question Question
Multiphase flow pumped in parallel?
Replies
3
Views
2K
innovativepumps
I
S
  • Question Question
Material used for the rotating shaft in Flowserve BB2 centrifugal pumps?
Replies
4
Views
14K
Vahid.A
V
PP007
  • Locked
  • Question Question
Accumulator bladder failure while in ruining system
Replies
7
Views
5K
PP007
PP007
D
  • Question Question
Q. Regarding Allowable Nozzle Loads and Moments in HI 9.6.2 vs. API 610
Replies
2
Views
7K
RVAmeche
RVAmeche
S
  • Question Question
Request for documents or assistance on mechanical design of conical shaft section in centrifugal pumps
Replies
5
Views
8K
Artisi
A

Part and Inventory Search

Sponsor

Back
Top