CONVERTING SOLID WORKS TO SOLID EDGE

[db43]

Is there any way to convert files between Solid Works and Solid edge? Not just having a solid view of the part, but being able to change geometry etc.?
So far it seems that although both programs use the same kernel, there is no a straight forward method, if possible at all.

 

[SBaugh]

No you will have to Parasolid them out. In SW you can use Feature works to get back to a Feature tree that you can edit.

There are very few if any at all CAD systems that are full compatiable with each other.

Regards,

Scott Baugh, CSWP

http://www.scottjbaugh.com

faq731-376