Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Converting power into acceleration

  • Thread starter Thread starter -
  • Start date Start date
Status
Not open for further replies.

Guest
Currently, i have a set of output response on vibration caused by traffic from a distance. The output response are in acceleration but i have a software which can only read values in terms of power. I would like to ask if any one out there knows how to convert acceleration into power and vice versa? Is there a formula to it or a software to do it?
 
Status
Not open for further replies.

Similar threads

JStructsteel
  • Locked
  • Question Question
Using coefficient of friction to back into wall friction angle
Replies
2
Views
300
JStructsteel
JStructsteel
LR11
  • Locked
  • Question Question
Lateral pressure coefficient - taking into account level of saturation
Replies
3
Views
1K
LR11
LR11
aj_k
  • Locked
  • Question Question
Hi, When concrete is poured into
Replies
8
Views
290
aj_k
aj_k
geot88
  • Locked
  • Question Question
Maximum horizontal acceleration and Liquefaction analysis
Replies
1
Views
179
Okiryu
Okiryu
ATSE
  • Locked
  • Question Question
Pseudo static acceleration and model size
Replies
0
Views
117
ATSE
ATSE

Part and Inventory Search

Sponsor

Back
Top