Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Convergence Of Regenerator Column

Status
Not open for further replies.
Abiodun1

Abiodun1

Chemical
Joined
Jul 20, 2006
Messages
19
Location
NG
Hi,

i am developing a conceptual model for gas dehydration using TEG using HYSYS.

The regenerator column for the TEG does not converge. I specify the required information by the column, putting the solver into adaptive mode to enhance convergence, and both condenser& reboiler pressure. The result still remain the same.

can anyone give me information on what i need to do!!! am stuck!!

Thanks
 
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question Question
Formulation of bitumen adhesive waterproofing
Replies
5
Views
4K
Compositepro
Compositepro
mikefot
  • Locked
  • Question Question
use of recycle to improve reactor performance
Replies
3
Views
1K
Rocco8
Rocco8
ReemaK
  • Locked
  • Question Question
h2s scrubbing from a mixture of h2s and nh3
Replies
10
Views
2K
ReemaK
ReemaK
Iomcube
  • Locked
  • Question Question
Heat of Dilution for H2SO4
Replies
7
Views
2K
horacio Torres
horacio Torres
Uralsk
  • Locked
  • Question Question
Steam cracking of naptha procedure?
Replies
0
Views
739
Uralsk
Uralsk

Part and Inventory Search

Sponsor

Back
Top