I am looking for information regarding controlled heating of extrusion containers. I have found plenty of info for aluminium extrusion but nothing for stainless. With the elements I have today, I am only achieving a temp peak of @ 275f on the inner liner. I am looking for 450f+. Does anyone have any info or links for this technology. Thanks in advance
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Container heating for extrusion press
- Thread starter limey1
- Start date
Are you considering high production induction heaters? I say high production because they usually cost allot.
===================================
Forging -------------------------------------------------
Ddraig Breuddwydia....
===================================
Forging -------------------------------------------------
Ddraig Breuddwydia....
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question
- Question