Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

COntact Set in Dynamic analyis..I-deas simulation

Status
Not open for further replies.
kar99429

kar99429

Mechanical
Joined
Nov 3, 2011
Messages
12
Location
FR
HI everyone,
I need to create contact for two surfaces that are in contact.
I am using I-deas SDRC for this simulation.
I am able to create contact set in linear statics solving.
My question is ..Is it possible to create contact set during dynamic analyis(REsponse Dynamics ) in I-deas software.. If not Why?

Please clarify .. Thanks in Advance
 
Status
Not open for further replies.

Similar threads

bjlasota
  • Locked
  • Question Question
What's the latest and greatest I-DEAS to Solidworks converters?
Replies
4
Views
1K
CADPat
CADPat
swale2
  • Locked
  • Question Question
Open native ideas files in NX
Replies
1
Views
897
rothers
rothers
Juan_Marcos
  • Locked
  • Question Question
Old version of I-DEAS 9.0?
Replies
2
Views
1K
Tornado220M
Tornado220M
engInfoAlt
  • Locked
  • Question Question
NX I-deas 6.5 - Access denied
Replies
7
Views
1K
I-DEAS
I-DEAS
LYukon
  • Locked
  • Question Question
I-Deas 12 model file size
Replies
1
Views
1K
CADPat
CADPat

Part and Inventory Search

Sponsor

Back
Top