Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Contact issue (Contact176/Target170)

Status
Not open for further replies.
Ataun

Ataun

Mechanical
Joined
Sep 13, 2011
Messages
3
Location
FR
Dear all,

Someone could explain the procedure to create contact elements (Contact176/Target170)? I have tried several ways but I don't get it. Also I have done some tutorials but... :(

Thanks
 
Status
Not open for further replies.

Similar threads

T
  • Question Question
Accessing Named Selections of Contact Surfaces via CMSEL After Applying Condensed Geometry Not Possible
Replies
0
Views
5K
TOM1345
T
sarclee
  • Locked
  • Question Question
2D Elements in Workbench Issue
Replies
0
Views
215
sarclee
sarclee
Vitkacy1989
  • Locked
  • Question Question
Contact with bolts - different results SHELL vs. SOLIDS
Replies
0
Views
1K
Vitkacy1989
Vitkacy1989
C.A
  • Locked
  • Question Question
why does the stress appear before two bodies come in contact(Ansys apdl)
Replies
0
Views
573
C.A
C.A
Mirghani
  • Locked
  • Question Question
How to Plot Contact Tool Results Using Path for multiple load steps??
Replies
0
Views
772
Mirghani
Mirghani

Part and Inventory Search

Sponsor

Back
Top