Constraints / Relations...?

[cadfreak]

When I create a Sketched Circle in SW2006 and start at the Origin (Origin point turns into a Red Dot) it does not constrain my circle (my circle is free floating). I thought when the Origin hilites red, it automatically constrains?

Any Ideas?

SW2006

 

[Luca83]

Do you have automatic relations turned on while in sketch mode? (tools>sketch settings>automatic relations)

-L@P.I.D.

Work: Dell PW690-Intel Xeon E5345 2.33GHz-PNY QUADRO FX3450 Drivers 77.56-4GB DDR2 FB-DIMM 667MHz ECC-80GB 10K-250GB 7.2K-Win XPx64-SW2007 SP2.2-RHINO 4.0 SP0
Play: Intel X6800 Core 2 Extreme - Asus P5W64 WS Pro i975X -2GB Corsair XMS-EVGA NV7900GTO(Mod. GTX Bios , FW93.71)-74GB Raptor-250GB WD Caviar

 

[CorBlimeyLimey]

Are you having other constraint problems?
Do you have the Automatic Relations button (sketch toolbar) activated?