Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Consolidation Curve and Rebound

Status
Not open for further replies.

rockrlady

Geotechnical
Jan 5, 2006
1
I am having trouble finding any direct answers to this question: How can I correlate a consolidation curve to potential soil rebound? Context: for a wetland restoration, will there be any rebound at all of clayey soils (in this case a MH or CH) and can a consolidation curve show me this? And how?
 
Replies continue below

Recommended for you

In theory, there is always rebound any time you remove soil from a site. However, in practice unless a great amount of soil is removed the amount of rebound is very small.

The consolidation curve provides the answer to the amount of rebound that will theoretically occur. Use the rebound portion of the curve, or the portion of the curve before the preconsolidation pressure if no rebound was performed, to calculate the theoretical amount of rebound. Don't be surprised if the rebound in the field appears to be zero. This is often the case because the rebound is happening while the excavation is going on, therefore the contractor just keeps digging. This is normally not a problem since the amount of rebound is small. However, I have heard of contractors getting additional money to cover the extra excavation in large deep excavations.

With all of that said, I'm not sure how this comes into play with a wet land restoration.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor