Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Connectors for board to wire harness in a sealed box

Status
Not open for further replies.

DHambley

Electrical
Dec 7, 2006
246
Does anyone have suggestions for the type/brand of connectors which are made to withstand the vibration and heat seen in an automotive environment? The connectors and wire harness join several PC boards within a sealed and enclosed box within the engine compartment so, dirt and water are not a concern; It is the vibration which is our concern. Our prototype presently uses cheap Sullins headers but, the production boards need a part which can withstand high vibration and shock levels. We don't need the expense of MIL-spec but we do need reliability.

Thanks in advance for you help.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor