Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Configurations with PDM/PLM
- Thread starter EClow
- Start date
I'd be tempted to ask this in the SW forum instead of here, but you might get answers.
KENAT,
Have you reminded yourself of faq731-376 recently, or taken a look at posting policies: What is Engineering anyway: faq1088-1484
KENAT,
Have you reminded yourself of faq731-376 recently, or taken a look at posting policies: What is Engineering anyway: faq1088-1484
I would use each SW configuration to relate to another PN. I have done this without any problems. It is probably worth mentioning that most folks consider it best practice to write policy stating that the drawing revision relates to the drawing as a document. The tabulations (parts) do not carry a revision. I have seen good discussions of this in other areas, but it is best to read several thick books on it. (Seriously!)
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question