Jan 31, 2004 #1 MOCHEM Chemical Joined Jan 31, 2004 Messages 3 Location AE hello every one can any one help me tocalculat the line size and the flash drum dimentions for mp condenst recovery?
hello every one can any one help me tocalculat the line size and the flash drum dimentions for mp condenst recovery?
Jan 31, 2004 #2 rmw Mechanical Joined Feb 6, 2002 Messages 5,724 Location US There is some valuable information on line sizing for various vapors and fluids as well as a link for flash tank sizing at http://www.sugartech.co.za I hope this is what you are looking for. rmw Upvote 0 Downvote
There is some valuable information on line sizing for various vapors and fluids as well as a link for flash tank sizing at http://www.sugartech.co.za I hope this is what you are looking for. rmw
Feb 2, 2004 #3 quark Mechanical Joined Jan 23, 2002 Messages 3,409 Location IN You can get design features of flash vessel from the following threads. thread794-55572 thread135-40593 For condensate recovery lines, check this http://www.armstrong.be/pdf/N_101.pdf Regards, Upvote 0 Downvote
You can get design features of flash vessel from the following threads. thread794-55572 thread135-40593 For condensate recovery lines, check this http://www.armstrong.be/pdf/N_101.pdf Regards,