Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Concrete Radiant floor slab on grade reinforcing

Status
Not open for further replies.
Gillespie

Gillespie

Structural
Aug 3, 2009
26
For a 6" thick concrete slab on grade (which will have radiant coils)
I am using wire mesh (2" from the top) then an layer of #4 bars at 16"o.c.
each way. Recommending saw cuts after.
Any recommendations to reduce further cracking........
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Where do the guys stand while placing the concrete?

BA
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

campbelltc
  • Question
Radiant Heated Floor Slab
Replies
9
Views
5K
campbelltc
campbelltc
m1208
  • Locked
  • Question
Concrete-slab floor on grade, surface delamination
Replies
2
Views
296
Tomfh
Tomfh
Skay999
  • Question
Slab on Grade - Reinforcement Design and Placement
Replies
3
Views
2K
EngDM
EngDM
SHAFEEH
  • Question
Wind load on canopies at ground floor (cantilevered glass canopy supported on first floor concrete slab) for building height > 18meter
Replies
4
Views
3K
SHAFEEH
SHAFEEH
StrEng007
  • Locked
  • Question
Exterior slab on grade expansion joints
Replies
11
Views
6K
ads0221
ads0221

Part and Inventory Search

Sponsor

Back
Top Bottom